OEM Best 304L Stainless Steel Pipe Suppliers - Exhaust flexible pipe with connection tube – Xinjing

NINGBO CONNECT AUTO PARTS CO., LTD is a brother company of Xinjing. We are manufacturing plant producing exhaust flex pipes(Someone also calls it exhaust bellows, corrugated pipes, flexible tubes, flexi joints, stainless steel flex hose, etc) for road vehicles. Running with the quality system IATF 16949, Connect currently exports to over 30 countries worldwide, offering long-term partnership solutions to customers seeking reliability and high-quality products for the aftermarket & OE market.

All our exhaust flexible pipes are in a gas-tight, double-walled and streamlined design suitable for the design and manufacture of exhaust systems, as well as for repairing defective exhaust systems. Some types of our flexible pipes are equipped with additional, welded stainless steel pipe connections(nipples). These can either be wielded or you can use an exhaust clamp.

Product Range

Specifications

（ Other ID 38, 40, 48, 52, 80mm … and other lengthes are on request ）

Features

This type of exhaust flexible pipe with extension tubes can be without inner liner or with inner braid liner. They mainly are used to aftermarket for fast repairing an auto exhaust system.

• Isolate vibration generated by the engine; thereby relieving stress on the exhaust system.
• Reduce premature cracking of manifolds and downpipes and help extend the life of other components.
• Applicable to different positions of the exhaust system; Most effective when installed in front of the pipe section of the exhaust system.
• Used To Decrease Engine Noise & Vibration.
• Double wall stainless steel for ensuring durability.
• Made of high temperature resistant & highly corrosion resistant material.
• Available in all standard sizes & kinds of stainless steel materials here in our factory.
• An economical repair option without having to replace entire exhaust assemblies.
• Size, diameter and length can be produced as per client’s requirements.

Quality Control

Every single unit is tested at least twice throughout the manufacturing cycle.

The first test is a visual inspection. The operator makes sure that:

• The part is placed in its fixture to ensure proper fitment on the vehicle.
• The welds are completed without any holes or gaps.
• The ends of the pipes are fished to the proper specifications.

The second test is a pressure test. The operator blocks all of the entrances and exits of the part and fills it with compressed air with a pressure equal to five times that of a standard exhaust system. This guarantees the structural integrity of the welds holding the piece together.

Please feel free to inquire, our engineers will give advice on all questions of sizes, functions, and materials chosen.

Production Line